Airlink101 A3-Port USB Print Server APSUSB2 Bedienungsanleitung PDF herunterladen (Seite 5)

Section 3

Configuring Network Setting

Before configuring the Print Server’s network setting, please take note of your computer’s

TCP/IP setting.

Step 1

Click on Start, Run, and type command (for Windows 95/98/ME) or cmd (for Windows 2000/

XP) and click OK.

Step 2 At the command prompt, type ipconfig and press Enter.

Step 3 Write down the information for the IP Address, Subnet Mask, and Default Gateway. You will

need these information later.

Step 4 Run the PS Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.

Step 5 Make sure the Print Server is listed under the Device Name and click on Change IP Address.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Keine Kommentare

Airlink101 A3-Port USB Print Server APSUSB2 Bedienungsanleitung Seite 5