Airlink101 AWLH3026T Bedienungsanleitung

802.11g Wireless PCI Adapter Model # AWLH3026T User’s Manual Ver. 1A

10 3. Configure the Wireless PCI Adapter This section describes how to connect your Airlink101 802.11g Wireless PCI Adapter to a wireless network. N

11 To open the Wireless PCI Adapter’s utility go to Start > (All) Programs > Airlink101 > WLAN Monitor. Note: The utility automatically ad

12 Step 2 If you are connecting to an unsecured wireless network, a caution message will appear. Click OK to exit the message. Step 3 Verify the SS

13 4. Configure the WLAN Monitor This section describes the various functions of the WLAN Monitor that you can configure, including the settings of w

14 listed beginning from the top of the list. If you wish to configure the properties of a WLAN, highlight it and click on Properties. Profile Group

15 Step 2 Select WEP from the Data Encryption drop-down list. Step 3 Select the appropriate Key length and Default key and enter the password in th

16 4.1.2 Configuring WPA-PSK Encryption Step 1 Select the SSID you wish to configure the encryption for from the Preferred WLANs box and then click P

17 Step 3 Enter the password in the WPA Passphrase field. The password must be the same as the wireless network you are connecting to. Step 4 Click

18 4.2 Status Tab The Status Tab displays information about the Connection State, Hardware Information, and Advance State. Connection Status: Disp

19 4.3 Option Tab The Option Tab allows you to configure the wireless adapter’s General and Advanced Settings as well as its Connection Type. Gene

2 Table of Contents 1. Introduction ...

20 Advance Setting Disable Radio: Check the box to disable the radio signal Fragmentation Threshold: Set the desired fragmentation threshold RTS Thre

21 4.4 About Tab The About Tab displays the Driver and Utility’s version number.

22 5. Specifications Frequency Band • 2.4 - 2.5 GHz ISM bandwidth Standards • IEEE 802.11b / 802.11g Host Interface • 32-bit PCI Antenna type • O

23 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *T

3 1. Introduction Thank you for purchasing the 802.11g Wireless PCI Adapter. The Wireless PCI Adapter is an advanced IEEE 802.11b/g compatible, high-

4 2. Installation 2.1 Install Driver & Utility This section provides instructions on how to install the Airlink101 802.11g Wireless PCI Adapter.

5 Step 3 The Autorun screen will appear. Select Install Utility and Driver from the menu. Note: If the Autorun screen doesn’t appear automatically

6 Step 5 Click Next to accept the default destination folder. Step 6 Click Next to accept the default program folder.

7 Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 7 Verify

8 2.2 Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click on

9 Step 3 Expand Network adapters from the list and verify that Airlink101 802.11g PCI Adapter is listed and no yellow question mark is beside it. I