Airlink101 AWLH3025 Bedienungsanleitung

Model # AWLH3025 User’s Manual Ver. 1A

- 6 - Step 7 Remove the Driver & Utility CD from your CD drive and then click OK to restart your computer.

- 7 - Install the device Note: Make sure the procedures in “Install Utility” have been performed. In most cases, Windows will automatically install t

- 8 - Note for Windows XP users: 1. Select Install the software automatically (Recommended) and click Next. 3. Click Continue Anyway at the Windows

- 9 - 4. Click Finish to complete the installation. Verify Device Installation To verify that the driver has been properly installed in your comput

Device Manager. Expand the Network adapters item. If the 802.11g Wireless PCI Card is listed, it means that your device is properly installed and ena

CONFIGURATION After successfully installing the driver and utility, a Utility Icon will appear on the desktop. If the Utility Icon doesn’t appear au

- 12 - Main Tab The Main tab displays the current status of the Wireless Network Adapter. Item Description External Configuration Uncheck the box to

Item Description - 13 - For TI-Based WLAN with encryption Mode Displays the type of connection: Access Point or Peer-to-Peer. Ch Displays the ch

- 14 - Preferred SSID Type in the SSID name of the device you want to connect to. BSS Type You can select the connection type: Peer-to-Peer, Acces

saved, select the profile from the pull-down menu and then click the Load button. Tx Power Level Select the transmit power level: Low Power, Medium-L

REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have e

- 16 - Short, please check the settings of your access point or wireless router. Retry limits You can set the number of retries if no acknowledgemen

- 17 - Advanced Tab The Advanced tab displays the current status of the Wireless Network Adapter.

- 18 - Privacy Tab Use the Privacy Tab to configure your WEP, CCX and WPA settings. WEP (Wired Equivalent Privacy), CCX （ Cisco Compatible Extension

- 19 - Privacy Mode Configure WEP, CCX, 802.1x and WPA settings. NONE：No security defined. WEP is a data security mechanism based on a 40 Bit (a.

- 20 - WEP Configuration None： Authentication The authentication type defines ID verification and access privileges of roaming wireless network card

devices in order to establish a connection. KEY1 ~ KEY 4：You can specify up to 4 different keys, but only one can be used at a time. Encryption：Enter

network. Personal Certificate This panel is available when EAP-TLS protocol is selected and enables you to select a certificate for authenticating th

- 23 - 802.1x： EAP-TLS EAP-TLS is a mutual authentication method, which means that both the client and the server prove their identities. LEAP Netwo

- 24 - 802.1x： Refer to the previous section for 802.1x Configuration.

- 25 - Statistics Tab The Statistics Tab displays any available statistics including Receive packets, Transmit packets, Association reject packets,

Table of Contents INTRODUCTION... 1 WIRELESS NETWORK OPTIONS ...

- 26 - About Tab Click on the About tab to view basic version information about the OS Version, Utility Version, Driver Version, Firmware Version and

UN-INSTALLATION If you need to uninstall the driver and utility, follow the steps below. (When you uninstall the utility, the driver will be uninstal

- 28 -

- 29 - Appendix Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com

PRIVACY TAB ... 18 WEP Configuration...

INTRODUCTION The 802.11g Wireless LAN Card is a device that allows you to connect your computer to a Wireless Local Area Network (WLAN). A wireless L

- 2 - You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers v

- 3 - LED Indicators For Wireless Network Adapter Card Power Indicator: (Green LED) This LED will illuminate when the driver is installed. Act Indic

INSTALLATION Caution: Be sure to power off your computer before inserting the PCI adapter. Install the Driver & Utility Step 1 Insert the PCI ada

- 5 - Step 4 When the Welcome screen appears, click Next . Step 5 Click Next to accept the default destination folder to install the software or cli