Airlink101 APO1010 Bedienungsanleitung PDF herunterladen (Seite 24)

3.1.2 Configure LAN IP

Here are the instructions to setup the local IP Address and Netmask.

Please click on System -> LAN and follow the below setting.

 Mode : Check either “Static IP” or “Dynamic IP” button as desired to set up the system IP of LAN port .

Î Static IP : The administrator can manually setup the LAN IP address when static IP is preferred.

9 IP Address : The IP address of the LAN port; default IP address is 192.168.1.254

9 IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0

9 IP Gateway : The default gateway of the LAN port; default Gateway is 192.168.1.1

Î Dynamic IP : This configuration type is applicable when the APO1000/APO1010 is connected to a network with

presence of a DHCP server. All related IP information will be provided by the DHCP server automatically.

9 Hostname : The Hostname of the LAN port

 DNS : Check either “No Default DNS Server” or “Specify DNS Server IP” button as desired to set up the system DNS.

Î Primary : The IP address of the primary DNS server.

Î Secondary : The IP address of the secondary DNS server.

 802.1d Spanning Tree

The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8 WDS

interfaces from wds0 to wds7. The Spanning Tree Protocol, which is also referred to as STP, is defined in the IEEE

Standard 802.1d.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 167 168

Keine Kommentare

Airlink101 APO1010 Bedienungsanleitung Seite 24